613-4 Craftex Planer
613-4 Craftex Planer613-4 Craftex Planer613-4 Craftex Planer613-4 Craftex Planer
Contact Mitch Brennan:
Call +1 604 556 2225
Intl. 1 (855) 556-5121 Ext.1

Craftex CX15 3HP Planner W/ 3 Knife Cutterhead

$1,100.00 CAD* (approx USD: 847) or best offer

1 in stock

[linked-products id=19636]
SKU: 613-4 Categories: , ,

SKU: 613-4



Location: Our Showroom

Ships to: Worldwide

Features and Specifications:

  • Motor: 3HP, 220 Volts, Single Phase, 15 Amps, TEFC
  • 3 “V” Belts Drive
  • Cutter Head Speed: 5,000 RPM
  • Cuts per minute : 15,000
  • Feed Rate: 16 FPM and 30 FPM plus Neutral.
  • Capacity: 15” Width, 8” Height
  • Minimum Stock Thickness: 3/16”
  • Max. Stock Thickness: 8”
  • Max. Cut Depth Planing Full Width – 3/32”
  • Max. Cut Depth Planing 6 Inch Wide Board 1/8”
  • Number of Cutter-Head Knives: 3 Knives H.S.S,
  • Cutter –Head Knives Size: 15″ x 3/4″ x 1/8″
  • Table Size: 20” x 15”
  • All Ball Bearing and Cast-Iron Construction
  • Precision Ground Cast Iron In-feed and Out-feed Tables with Rollers
  • Oil-Bath Gear Box supplies 2 speeds and neutral to the in-feed and out-feed rollers
  • Powder Coated Paint
  • Mobile Base with Locking Foot Pedal
  • 4” Dust Port is Included
  • Weight: 650 lbs.
  • Length 42”
  • Width 32-1/2”
  • Height 45-7/8”
Features, Specifications, Dimensions & Weight data is approximate and to the best of our knowledge.
Please call for more information.

Additional information

Weight 295 kg
Dimensions 42 x 33 x 46 in










  • Selection Required: Select product options above before making new offer.
  • Offer Sent! Your offer has been received and will be processed as soon as possible.
  • Error: There was an error sending your offer, please try again. If this problem persists, please contact us.

Make Offer

To make an offer please complete the form below:


Please wait...

Coast Machinery Group sells used, pre-owned machinery on a first come first served basis. All used machinery is not covered under any warranty unless otherwise stated and is provided "as-is". Descriptions and specifications are provided to the best of our knowledge (some information is communicated via 3rd-party sources). It is recommended that machinery be inspected prior to purchase to confirm the condition and specification. Additional charges such as crating, loading, export duties, taxes and delivery may apply.