Technical data (2018)
Workpiece length X with single processing: 3 100mm (M) or 4 200mm (L)
Workpiecelength X with pendulum processing: 1 025mm (M) or 1 575mm (L)
Workpiece length X with single processing and tool diameter 25mm:
3 300mm (M) or 4 400mm (L)
Workpiece width with tool diameter 25mm Y: 1 550mm and 1 415 (5-axis)
Workpiece width Y: 1 440mm and 1 210 (5-axis)
Workpiece thickness: 260mm
Equipment of standard version (2018)
Control panel integrated within the CNC
Proximity scanner (can halt automatically)
Bumper security technology
mobile control terminal with powerTouch
22 tool change spots
plate changing unit going along in x-direction: 8-times or 14-times
lateral linear changing unit with tool delivery spot: 8-times (3-/4-axis) and 7-times with a spot for saws with up to Ø 350mm (5-axis)
Drilling technology
Spindle locking
Double-acting cylinder with pneumatic feed and reciprocrating grates
Huge pinole diamter
Distance from drilling peaks for storage short and constant
Standing sleeve
Quick changing system
Separate axial storage with single-circuit vacuum system
Measure belt
Electronical stop position
Connections for templates and clamping MultiClamp- clampelements (optional for pneumatic elements)
Table length M with 3100mm: 12 vacuum block suction, 6 vacuum narrow suction
Table length L with 4200mm: 16 vacuum block suction, 8 vacuum narrow suction
Suction storage spot
Workpiece insertion aid with 2 pneumatic cylinders
Stop system with 16 bolts: 6 in the back, 6 in the front, each two on the sides
Linear guiding system
Two synchronic servo drives in x-direction
Scanner for control functions left and right from the stop profile
ecoPlus – Technologie
woodWOP
Optional Additional equipment
Units
Air-cooled milling spindle with 10 kW (optional 13,2 kW)
C-axis for units with three point pneumatic
Liquid-cooled DRIVE5CS 5-axis-head with 10kW (optional 12kW)
for console table
LED positioning system
Laser positining aid
Stops at top layer protrusion
Multi clamping system
PowerClamp
Chip transport belt
Clamping system
Disturbence-free power supply
Klimatised control panel
“Starter KIT” tool case for respective edition
Scanner for control functions on portal housing
Laser scanner
3-/4-axis machine
Drilling gear
V12/H6 with 18 drilling spindles: 12 vertical, 4 horizontal in X and 2 horizontal in Y; groove saws Ø 100mm
V17/H10 with 27 drilling spindles: 17 vertical, 6 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
V21/H12 with 33 drilling spindle: 21 vertical, 8 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
Unit for 4-axis
High Performance: slicing; sawing; drilling/sawing/milling (2 spindles); lock case (2 spindles); drilling/saws 0°-90° pivotable
drilling/sawing/milling (2 spindles)
drilling/milling (4 Spindles)
Lock case (2 Spindeln)
FLEX5 drilling/sawing/milling
drilling/milling 0°-90° pivotable
drilling/milling 0°-90° pivotable elbowed
Cutting unit
